Contract Name:
MultiSendCallOnly
Contract Source Code:
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title Multi Send - Allows to batch multiple transactions into one.
* @author Nick Dodson - <[email protected]>
* @author Gonçalo Sá - <[email protected]>
* @author Stefan George - @Georgi87
* @author Richard Meissner - @rmeissner
*/
contract MultiSend {
address private immutable multisendSingleton;
constructor() {
multisendSingleton = address(this);
}
/**
* @dev Sends multiple transactions and reverts all if one fails.
* @param transactions Encoded transactions. Each transaction is encoded as a packed bytes of
* operation as a uint8 with 0 for a call or 1 for a delegatecall (=> 1 byte),
* to as a address (=> 20 bytes),
* value as a uint256 (=> 32 bytes),
* data length as a uint256 (=> 32 bytes),
* data as bytes.
* see abi.encodePacked for more information on packed encoding
* @notice This method is payable as delegatecalls keep the msg.value from the previous call
* If the calling method (e.g. execTransaction) received ETH this would revert otherwise
*/
function multiSend(bytes memory transactions) public payable {
require(address(this) != multisendSingleton, "MultiSend should only be called via delegatecall");
// solhint-disable-next-line no-inline-assembly
assembly {
let length := mload(transactions)
let i := 0x20
for {
// Pre block is not used in "while mode"
} lt(i, length) {
// Post block is not used in "while mode"
} {
// First byte of the data is the operation.
// We shift by 248 bits (256 - 8 [operation byte]) it right since mload will always load 32 bytes (a word).
// This will also zero out unused data.
let operation := shr(0xf8, mload(add(transactions, i)))
// We offset the load address by 1 byte (operation byte)
// We shift it right by 96 bits (256 - 160 [20 address bytes]) to right-align the data and zero out unused data.
let to := shr(0x60, mload(add(transactions, add(i, 0x01))))
// We offset the load address by 21 byte (operation byte + 20 address bytes)
let value := mload(add(transactions, add(i, 0x15)))
// We offset the load address by 53 byte (operation byte + 20 address bytes + 32 value bytes)
let dataLength := mload(add(transactions, add(i, 0x35)))
// We offset the load address by 85 byte (operation byte + 20 address bytes + 32 value bytes + 32 data length bytes)
let data := add(transactions, add(i, 0x55))
let success := 0
switch operation
case 0 {
success := call(gas(), to, value, data, dataLength, 0, 0)
}
case 1 {
success := delegatecall(gas(), to, data, dataLength, 0, 0)
}
if eq(success, 0) {
revert(0, 0)
}
// Next entry starts at 85 byte + data length
i := add(i, add(0x55, dataLength))
}
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title Create Call - Allows to use the different create opcodes to deploy a contract.
* @author Richard Meissner - @rmeissner
* @notice This contract provides functions for deploying a new contract using the create and create2 opcodes.
*/
contract CreateCall {
/// @notice Emitted when a new contract is created
event ContractCreation(address indexed newContract);
/**
* @notice Deploys a new contract using the create2 opcode.
* @param value The value in wei to be sent with the contract creation.
* @param deploymentData The initialisation code of the contract to be created.
* @param salt The salt value to use for the contract creation.
* @return newContract The address of the newly created contract.
*/
function performCreate2(uint256 value, bytes memory deploymentData, bytes32 salt) public returns (address newContract) {
// solhint-disable-next-line no-inline-assembly
assembly {
newContract := create2(value, add(0x20, deploymentData), mload(deploymentData), salt)
}
require(newContract != address(0), "Could not deploy contract");
emit ContractCreation(newContract);
}
/**
* @notice Deploys a new contract using the create opcode.
* @param value The value in wei to be sent with the contract creation.
* @param deploymentData The initialisation code of the contract to be created.
* @return newContract The address of the newly created contract.
*/
function performCreate(uint256 value, bytes memory deploymentData) public returns (address newContract) {
// solhint-disable-next-line no-inline-assembly
assembly {
newContract := create(value, add(deploymentData, 0x20), mload(deploymentData))
}
require(newContract != address(0), "Could not deploy contract");
emit ContractCreation(newContract);
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title Multi Send Call Only - Allows to batch multiple transactions into one, but only calls
* @notice The guard logic is not required here as this contract doesn't support nested delegate calls
* @author Stefan George - @Georgi87
* @author Richard Meissner - @rmeissner
*/
contract MultiSendCallOnly {
/**
* @dev Sends multiple transactions and reverts all if one fails.
* @param transactions Encoded transactions. Each transaction is encoded as a packed bytes of
* operation has to be uint8(0) in this version (=> 1 byte),
* to as a address (=> 20 bytes),
* value as a uint256 (=> 32 bytes),
* data length as a uint256 (=> 32 bytes),
* data as bytes.
* see abi.encodePacked for more information on packed encoding
* @notice The code is for most part the same as the normal MultiSend (to keep compatibility),
* but reverts if a transaction tries to use a delegatecall.
* @notice This method is payable as delegatecalls keep the msg.value from the previous call
* If the calling method (e.g. execTransaction) received ETH this would revert otherwise
*/
function multiSend(bytes memory transactions) public payable {
// solhint-disable-next-line no-inline-assembly
assembly {
let length := mload(transactions)
let i := 0x20
for {
// Pre block is not used in "while mode"
} lt(i, length) {
// Post block is not used in "while mode"
} {
// First byte of the data is the operation.
// We shift by 248 bits (256 - 8 [operation byte]) it right since mload will always load 32 bytes (a word).
// This will also zero out unused data.
let operation := shr(0xf8, mload(add(transactions, i)))
// We offset the load address by 1 byte (operation byte)
// We shift it right by 96 bits (256 - 160 [20 address bytes]) to right-align the data and zero out unused data.
let to := shr(0x60, mload(add(transactions, add(i, 0x01))))
// We offset the load address by 21 byte (operation byte + 20 address bytes)
let value := mload(add(transactions, add(i, 0x15)))
// We offset the load address by 53 byte (operation byte + 20 address bytes + 32 value bytes)
let dataLength := mload(add(transactions, add(i, 0x35)))
// We offset the load address by 85 byte (operation byte + 20 address bytes + 32 value bytes + 32 data length bytes)
let data := add(transactions, add(i, 0x55))
let success := 0
switch operation
case 0 {
success := call(gas(), to, value, data, dataLength, 0, 0)
}
// This version does not allow delegatecalls
case 1 {
revert(0, 0)
}
if eq(success, 0) {
revert(0, 0)
}
// Next entry starts at 85 byte + data length
i := add(i, add(0x55, dataLength))
}
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./SafeProxy.sol";
/**
* @title IProxyCreationCallback
* @dev An interface for a contract that implements a callback function to be executed after the creation of a proxy instance.
*/
interface IProxyCreationCallback {
/**
* @dev Function to be called after the creation of a SafeProxy instance.
* @param proxy The newly created SafeProxy instance.
* @param _singleton The address of the singleton contract used to create the proxy.
* @param initializer The initializer function call data.
* @param saltNonce The nonce used to generate the salt for the proxy deployment.
*/
function proxyCreated(SafeProxy proxy, address _singleton, bytes calldata initializer, uint256 saltNonce) external;
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title IProxy - Helper interface to access the singleton address of the Proxy on-chain.
* @author Richard Meissner - @rmeissner
*/
interface IProxy {
function masterCopy() external view returns (address);
}
/**
* @title SafeProxy - Generic proxy contract allows to execute all transactions applying the code of a master contract.
* @author Stefan George - <[email protected]>
* @author Richard Meissner - <[email protected]>
*/
contract SafeProxy {
// Singleton always needs to be first declared variable, to ensure that it is at the same location in the contracts to which calls are delegated.
// To reduce deployment costs this variable is internal and needs to be retrieved via `getStorageAt`
address internal singleton;
/**
* @notice Constructor function sets address of singleton contract.
* @param _singleton Singleton address.
*/
constructor(address _singleton) {
require(_singleton != address(0), "Invalid singleton address provided");
singleton = _singleton;
}
/// @dev Fallback function forwards all transactions and returns all received return data.
fallback() external payable {
// solhint-disable-next-line no-inline-assembly
assembly {
let _singleton := and(sload(0), 0xffffffffffffffffffffffffffffffffffffffff)
// 0xa619486e == keccak("masterCopy()"). The value is right padded to 32-bytes with 0s
if eq(calldataload(0), 0xa619486e00000000000000000000000000000000000000000000000000000000) {
mstore(0, _singleton)
return(0, 0x20)
}
calldatacopy(0, 0, calldatasize())
let success := delegatecall(gas(), _singleton, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
if eq(success, 0) {
revert(0, returndatasize())
}
return(0, returndatasize())
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./SafeProxy.sol";
import "./IProxyCreationCallback.sol";
/**
* @title Proxy Factory - Allows to create a new proxy contract and execute a message call to the new proxy within one transaction.
* @author Stefan George - @Georgi87
*/
contract SafeProxyFactory {
event ProxyCreation(SafeProxy indexed proxy, address singleton);
/// @dev Allows to retrieve the creation code used for the Proxy deployment. With this it is easily possible to calculate predicted address.
function proxyCreationCode() public pure returns (bytes memory) {
return type(SafeProxy).creationCode;
}
/**
* @notice Internal method to create a new proxy contract using CREATE2. Optionally executes an initializer call to a new proxy.
* @param _singleton Address of singleton contract. Must be deployed at the time of execution.
* @param initializer (Optional) Payload for a message call to be sent to a new proxy contract.
* @param salt Create2 salt to use for calculating the address of the new proxy contract.
* @return proxy Address of the new proxy contract.
*/
function deployProxy(address _singleton, bytes memory initializer, bytes32 salt) internal returns (SafeProxy proxy) {
require(isContract(_singleton), "Singleton contract not deployed");
bytes memory deploymentData = abi.encodePacked(type(SafeProxy).creationCode, uint256(uint160(_singleton)));
// solhint-disable-next-line no-inline-assembly
assembly {
proxy := create2(0x0, add(0x20, deploymentData), mload(deploymentData), salt)
}
require(address(proxy) != address(0), "Create2 call failed");
if (initializer.length > 0) {
// solhint-disable-next-line no-inline-assembly
assembly {
if eq(call(gas(), proxy, 0, add(initializer, 0x20), mload(initializer), 0, 0), 0) {
revert(0, 0)
}
}
}
}
/**
* @notice Deploys a new proxy with `_singleton` singleton and `saltNonce` salt. Optionally executes an initializer call to a new proxy.
* @param _singleton Address of singleton contract. Must be deployed at the time of execution.
* @param initializer Payload for a message call to be sent to a new proxy contract.
* @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
*/
function createProxyWithNonce(address _singleton, bytes memory initializer, uint256 saltNonce) public returns (SafeProxy proxy) {
// If the initializer changes the proxy address should change too. Hashing the initializer data is cheaper than just concatinating it
bytes32 salt = keccak256(abi.encodePacked(keccak256(initializer), saltNonce));
proxy = deployProxy(_singleton, initializer, salt);
emit ProxyCreation(proxy, _singleton);
}
/**
* @notice Deploys a new chain-specific proxy with `_singleton` singleton and `saltNonce` salt. Optionally executes an initializer call to a new proxy.
* @dev Allows to create a new proxy contract that should exist only on 1 network (e.g. specific governance or admin accounts)
* by including the chain id in the create2 salt. Such proxies cannot be created on other networks by replaying the transaction.
* @param _singleton Address of singleton contract. Must be deployed at the time of execution.
* @param initializer Payload for a message call to be sent to a new proxy contract.
* @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
*/
function createChainSpecificProxyWithNonce(
address _singleton,
bytes memory initializer,
uint256 saltNonce
) public returns (SafeProxy proxy) {
// If the initializer changes the proxy address should change too. Hashing the initializer data is cheaper than just concatinating it
bytes32 salt = keccak256(abi.encodePacked(keccak256(initializer), saltNonce, getChainId()));
proxy = deployProxy(_singleton, initializer, salt);
emit ProxyCreation(proxy, _singleton);
}
/**
* @notice Deploy a new proxy with `_singleton` singleton and `saltNonce` salt.
* Optionally executes an initializer call to a new proxy and calls a specified callback address `callback`.
* @param _singleton Address of singleton contract. Must be deployed at the time of execution.
* @param initializer Payload for a message call to be sent to a new proxy contract.
* @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
* @param callback Callback that will be invoked after the new proxy contract has been successfully deployed and initialized.
*/
function createProxyWithCallback(
address _singleton,
bytes memory initializer,
uint256 saltNonce,
IProxyCreationCallback callback
) public returns (SafeProxy proxy) {
uint256 saltNonceWithCallback = uint256(keccak256(abi.encodePacked(saltNonce, callback)));
proxy = createProxyWithNonce(_singleton, initializer, saltNonceWithCallback);
if (address(callback) != address(0)) callback.proxyCreated(proxy, _singleton, initializer, saltNonce);
}
/**
* @notice Returns true if `account` is a contract.
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param account The address being queried
* @return True if `account` is a contract
*/
function isContract(address account) internal view returns (bool) {
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @notice Returns the ID of the chain the contract is currently deployed on.
* @return The ID of the current chain as a uint256.
*/
function getChainId() public view returns (uint256) {
uint256 id;
// solhint-disable-next-line no-inline-assembly
assembly {
id := chainid()
}
return id;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../base/Executor.sol";
/**
* @title Simulate Transaction Accessor.
* @notice Can be used with StorageAccessible to simulate Safe transactions.
* @author Richard Meissner - @rmeissner
*/
contract SimulateTxAccessor is Executor {
address private immutable accessorSingleton;
constructor() {
accessorSingleton = address(this);
}
/**
* @notice Modifier to make a function callable via delegatecall only.
* If the function is called via a regular call, it will revert.
*/
modifier onlyDelegateCall() {
require(address(this) != accessorSingleton, "SimulateTxAccessor should only be called via delegatecall");
_;
}
/**
* @notice Simulates a Safe transaction and returns the used gas, success boolean and the return data.
* @dev Executes the specified operation {Call, DelegateCall} and returns operation-specific data.
* Has to be called via delegatecall.
* This returns the data equal to `abi.encode(uint256(etimate), bool(success), bytes(returnData))`.
* Specifically, the returndata will be:
* `estimate:uint256 || success:bool || returnData.length:uint256 || returnData:bytes`.
* @param to Destination address .
* @param value Native token value.
* @param data Data payload.
* @param operation Operation type {Call, DelegateCall}.
* @return estimate Gas used.
* @return success Success boolean value.
* @return returnData Return data.
*/
function simulate(
address to,
uint256 value,
bytes calldata data,
Enum.Operation operation
) external onlyDelegateCall returns (uint256 estimate, bool success, bytes memory returnData) {
uint256 startGas = gasleft();
success = execute(to, value, data, operation, gasleft());
estimate = startGas - gasleft();
// solhint-disable-next-line no-inline-assembly
assembly {
// Load free memory location
let ptr := mload(0x40)
// We allocate memory for the return data by setting the free memory location to
// current free memory location + data size + 32 bytes for data size value
mstore(0x40, add(ptr, add(returndatasize(), 0x20)))
// Store the size
mstore(ptr, returndatasize())
// Store the data
returndatacopy(add(ptr, 0x20), 0, returndatasize())
// Point the return data to the correct memory location
returnData := ptr
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
/**
* @title Executor - A contract that can execute transactions
* @author Richard Meissner - @rmeissner
*/
abstract contract Executor {
/**
* @notice Executes either a delegatecall or a call with provided parameters.
* @dev This method doesn't perform any sanity check of the transaction, such as:
* - if the contract at `to` address has code or not
* It is the responsibility of the caller to perform such checks.
* @param to Destination address.
* @param value Ether value.
* @param data Data payload.
* @param operation Operation type.
* @return success boolean flag indicating if the call succeeded.
*/
function execute(
address to,
uint256 value,
bytes memory data,
Enum.Operation operation,
uint256 txGas
) internal returns (bool success) {
if (operation == Enum.Operation.DelegateCall) {
// solhint-disable-next-line no-inline-assembly
assembly {
success := delegatecall(txGas, to, add(data, 0x20), mload(data), 0, 0)
}
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
success := call(txGas, to, value, add(data, 0x20), mload(data), 0, 0)
}
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/SelfAuthorized.sol";
/**
* @title Fallback Manager - A contract managing fallback calls made to this contract
* @author Richard Meissner - @rmeissner
*/
abstract contract FallbackManager is SelfAuthorized {
event ChangedFallbackHandler(address indexed handler);
// keccak256("fallback_manager.handler.address")
bytes32 internal constant FALLBACK_HANDLER_STORAGE_SLOT = 0x6c9a6c4a39284e37ed1cf53d337577d14212a4870fb976a4366c693b939918d5;
/**
* @notice Internal function to set the fallback handler.
* @param handler contract to handle fallback calls.
*/
function internalSetFallbackHandler(address handler) internal {
/*
If a fallback handler is set to self, then the following attack vector is opened:
Imagine we have a function like this:
function withdraw() internal authorized {
withdrawalAddress.call.value(address(this).balance)("");
}
If the fallback method is triggered, the fallback handler appends the msg.sender address to the calldata and calls the fallback handler.
A potential attacker could call a Safe with the 3 bytes signature of a withdraw function. Since 3 bytes do not create a valid signature,
the call would end in a fallback handler. Since it appends the msg.sender address to the calldata, the attacker could craft an address
where the first 3 bytes of the previous calldata + the first byte of the address make up a valid function signature. The subsequent call would result in unsanctioned access to Safe's internal protected methods.
For some reason, solidity matches the first 4 bytes of the calldata to a function signature, regardless if more data follow these 4 bytes.
*/
require(handler != address(this), "GS400");
bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
sstore(slot, handler)
}
}
/**
* @notice Set Fallback Handler to `handler` for the Safe.
* @dev Only fallback calls without value and with data will be forwarded.
* This can only be done via a Safe transaction.
* Cannot be set to the Safe itself.
* @param handler contract to handle fallback calls.
*/
function setFallbackHandler(address handler) public authorized {
internalSetFallbackHandler(handler);
emit ChangedFallbackHandler(handler);
}
// @notice Forwards all calls to the fallback handler if set. Returns 0 if no handler is set.
// @dev Appends the non-padded caller address to the calldata to be optionally used in the handler
// The handler can make us of `HandlerContext.sol` to extract the address.
// This is done because in the next call frame the `msg.sender` will be FallbackManager's address
// and having the original caller address may enable additional verification scenarios.
// solhint-disable-next-line payable-fallback,no-complex-fallback
fallback() external {
bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
let handler := sload(slot)
if iszero(handler) {
return(0, 0)
}
calldatacopy(0, 0, calldatasize())
// The msg.sender address is shifted to the left by 12 bytes to remove the padding
// Then the address without padding is stored right after the calldata
mstore(calldatasize(), shl(96, caller()))
// Add 20 bytes for the address appended add the end
let success := call(gas(), handler, 0, 0, add(calldatasize(), 20), 0, 0)
returndatacopy(0, 0, returndatasize())
if iszero(success) {
revert(0, returndatasize())
}
return(0, returndatasize())
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
import "../common/SelfAuthorized.sol";
import "../interfaces/IERC165.sol";
interface Guard is IERC165 {
function checkTransaction(
address to,
uint256 value,
bytes memory data,
Enum.Operation operation,
uint256 safeTxGas,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
address payable refundReceiver,
bytes memory signatures,
address msgSender
) external;
function checkAfterExecution(bytes32 txHash, bool success) external;
}
abstract contract BaseGuard is Guard {
function supportsInterface(bytes4 interfaceId) external view virtual override returns (bool) {
return
interfaceId == type(Guard).interfaceId || // 0xe6d7a83a
interfaceId == type(IERC165).interfaceId; // 0x01ffc9a7
}
}
/**
* @title Guard Manager - A contract managing transaction guards which perform pre and post-checks on Safe transactions.
* @author Richard Meissner - @rmeissner
*/
abstract contract GuardManager is SelfAuthorized {
event ChangedGuard(address indexed guard);
// keccak256("guard_manager.guard.address")
bytes32 internal constant GUARD_STORAGE_SLOT = 0x4a204f620c8c5ccdca3fd54d003badd85ba500436a431f0cbda4f558c93c34c8;
/**
* @dev Set a guard that checks transactions before execution
* This can only be done via a Safe transaction.
* ⚠️ IMPORTANT: Since a guard has full power to block Safe transaction execution,
* a broken guard can cause a denial of service for the Safe. Make sure to carefully
* audit the guard code and design recovery mechanisms.
* @notice Set Transaction Guard `guard` for the Safe. Make sure you trust the guard.
* @param guard The address of the guard to be used or the 0 address to disable the guard
*/
function setGuard(address guard) external authorized {
if (guard != address(0)) {
require(Guard(guard).supportsInterface(type(Guard).interfaceId), "GS300");
}
bytes32 slot = GUARD_STORAGE_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
sstore(slot, guard)
}
emit ChangedGuard(guard);
}
/**
* @dev Internal method to retrieve the current guard
* We do not have a public method because we're short on bytecode size limit,
* to retrieve the guard address, one can use `getStorageAt` from `StorageAccessible` contract
* with the slot `GUARD_STORAGE_SLOT`
* @return guard The address of the guard
*/
function getGuard() internal view returns (address guard) {
bytes32 slot = GUARD_STORAGE_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
guard := sload(slot)
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
import "../common/SelfAuthorized.sol";
import "./Executor.sol";
/**
* @title Module Manager - A contract managing Safe modules
* @notice Modules are extensions with unlimited access to a Safe that can be added to a Safe by its owners.
⚠️ WARNING: Modules are a security risk since they can execute arbitrary transactions,
so only trusted and audited modules should be added to a Safe. A malicious module can
completely takeover a Safe.
* @author Stefan George - @Georgi87
* @author Richard Meissner - @rmeissner
*/
abstract contract ModuleManager is SelfAuthorized, Executor {
event EnabledModule(address indexed module);
event DisabledModule(address indexed module);
event ExecutionFromModuleSuccess(address indexed module);
event ExecutionFromModuleFailure(address indexed module);
address internal constant SENTINEL_MODULES = address(0x1);
mapping(address => address) internal modules;
/**
* @notice Setup function sets the initial storage of the contract.
* Optionally executes a delegate call to another contract to setup the modules.
* @param to Optional destination address of call to execute.
* @param data Optional data of call to execute.
*/
function setupModules(address to, bytes memory data) internal {
require(modules[SENTINEL_MODULES] == address(0), "GS100");
modules[SENTINEL_MODULES] = SENTINEL_MODULES;
if (to != address(0)) {
require(isContract(to), "GS002");
// Setup has to complete successfully or transaction fails.
require(execute(to, 0, data, Enum.Operation.DelegateCall, type(uint256).max), "GS000");
}
}
/**
* @notice Enables the module `module` for the Safe.
* @dev This can only be done via a Safe transaction.
* @param module Module to be whitelisted.
*/
function enableModule(address module) public authorized {
// Module address cannot be null or sentinel.
require(module != address(0) && module != SENTINEL_MODULES, "GS101");
// Module cannot be added twice.
require(modules[module] == address(0), "GS102");
modules[module] = modules[SENTINEL_MODULES];
modules[SENTINEL_MODULES] = module;
emit EnabledModule(module);
}
/**
* @notice Disables the module `module` for the Safe.
* @dev This can only be done via a Safe transaction.
* @param prevModule Previous module in the modules linked list.
* @param module Module to be removed.
*/
function disableModule(address prevModule, address module) public authorized {
// Validate module address and check that it corresponds to module index.
require(module != address(0) && module != SENTINEL_MODULES, "GS101");
require(modules[prevModule] == module, "GS103");
modules[prevModule] = modules[module];
modules[module] = address(0);
emit DisabledModule(module);
}
/**
* @notice Execute `operation` (0: Call, 1: DelegateCall) to `to` with `value` (Native Token)
* @dev Function is virtual to allow overriding for L2 singleton to emit an event for indexing.
* @param to Destination address of module transaction.
* @param value Ether value of module transaction.
* @param data Data payload of module transaction.
* @param operation Operation type of module transaction.
* @return success Boolean flag indicating if the call succeeded.
*/
function execTransactionFromModule(
address to,
uint256 value,
bytes memory data,
Enum.Operation operation
) public virtual returns (bool success) {
// Only whitelisted modules are allowed.
require(msg.sender != SENTINEL_MODULES && modules[msg.sender] != address(0), "GS104");
// Execute transaction without further confirmations.
success = execute(to, value, data, operation, type(uint256).max);
if (success) emit ExecutionFromModuleSuccess(msg.sender);
else emit ExecutionFromModuleFailure(msg.sender);
}
/**
* @notice Execute `operation` (0: Call, 1: DelegateCall) to `to` with `value` (Native Token) and return data
* @param to Destination address of module transaction.
* @param value Ether value of module transaction.
* @param data Data payload of module transaction.
* @param operation Operation type of module transaction.
* @return success Boolean flag indicating if the call succeeded.
* @return returnData Data returned by the call.
*/
function execTransactionFromModuleReturnData(
address to,
uint256 value,
bytes memory data,
Enum.Operation operation
) public returns (bool success, bytes memory returnData) {
success = execTransactionFromModule(to, value, data, operation);
// solhint-disable-next-line no-inline-assembly
assembly {
// Load free memory location
let ptr := mload(0x40)
// We allocate memory for the return data by setting the free memory location to
// current free memory location + data size + 32 bytes for data size value
mstore(0x40, add(ptr, add(returndatasize(), 0x20)))
// Store the size
mstore(ptr, returndatasize())
// Store the data
returndatacopy(add(ptr, 0x20), 0, returndatasize())
// Point the return data to the correct memory location
returnData := ptr
}
}
/**
* @notice Returns if an module is enabled
* @return True if the module is enabled
*/
function isModuleEnabled(address module) public view returns (bool) {
return SENTINEL_MODULES != module && modules[module] != address(0);
}
/**
* @notice Returns an array of modules.
* If all entries fit into a single page, the next pointer will be 0x1.
* If another page is present, next will be the last element of the returned array.
* @param start Start of the page. Has to be a module or start pointer (0x1 address)
* @param pageSize Maximum number of modules that should be returned. Has to be > 0
* @return array Array of modules.
* @return next Start of the next page.
*/
function getModulesPaginated(address start, uint256 pageSize) external view returns (address[] memory array, address next) {
require(start == SENTINEL_MODULES || isModuleEnabled(start), "GS105");
require(pageSize > 0, "GS106");
// Init array with max page size
array = new address[](pageSize);
// Populate return array
uint256 moduleCount = 0;
next = modules[start];
while (next != address(0) && next != SENTINEL_MODULES && moduleCount < pageSize) {
array[moduleCount] = next;
next = modules[next];
moduleCount++;
}
/**
Because of the argument validation, we can assume that the loop will always iterate over the valid module list values
and the `next` variable will either be an enabled module or a sentinel address (signalling the end).
If we haven't reached the end inside the loop, we need to set the next pointer to the last element of the modules array
because the `next` variable (which is a module by itself) acting as a pointer to the start of the next page is neither
included to the current page, nor will it be included in the next one if you pass it as a start.
*/
if (next != SENTINEL_MODULES) {
next = array[moduleCount - 1];
}
// Set correct size of returned array
// solhint-disable-next-line no-inline-assembly
assembly {
mstore(array, moduleCount)
}
}
/**
* @notice Returns true if `account` is a contract.
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param account The address being queried
*/
function isContract(address account) internal view returns (bool) {
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
return size > 0;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/SelfAuthorized.sol";
/**
* @title OwnerManager - Manages Safe owners and a threshold to authorize transactions.
* @dev Uses a linked list to store the owners because the code generate by the solidity compiler
* is more efficient than using a dynamic array.
* @author Stefan George - @Georgi87
* @author Richard Meissner - @rmeissner
*/
abstract contract OwnerManager is SelfAuthorized {
event AddedOwner(address indexed owner);
event RemovedOwner(address indexed owner);
event ChangedThreshold(uint256 threshold);
address internal constant SENTINEL_OWNERS = address(0x1);
mapping(address => address) internal owners;
uint256 internal ownerCount;
uint256 internal threshold;
/**
* @notice Sets the initial storage of the contract.
* @param _owners List of Safe owners.
* @param _threshold Number of required confirmations for a Safe transaction.
*/
function setupOwners(address[] memory _owners, uint256 _threshold) internal {
// Threshold can only be 0 at initialization.
// Check ensures that setup function can only be called once.
require(threshold == 0, "GS200");
// Validate that threshold is smaller than number of added owners.
require(_threshold <= _owners.length, "GS201");
// There has to be at least one Safe owner.
require(_threshold >= 1, "GS202");
// Initializing Safe owners.
address currentOwner = SENTINEL_OWNERS;
for (uint256 i = 0; i < _owners.length; i++) {
// Owner address cannot be null.
address owner = _owners[i];
require(owner != address(0) && owner != SENTINEL_OWNERS && owner != address(this) && currentOwner != owner, "GS203");
// No duplicate owners allowed.
require(owners[owner] == address(0), "GS204");
owners[currentOwner] = owner;
currentOwner = owner;
}
owners[currentOwner] = SENTINEL_OWNERS;
ownerCount = _owners.length;
threshold = _threshold;
}
/**
* @notice Adds the owner `owner` to the Safe and updates the threshold to `_threshold`.
* @dev This can only be done via a Safe transaction.
* @param owner New owner address.
* @param _threshold New threshold.
*/
function addOwnerWithThreshold(address owner, uint256 _threshold) public authorized {
// Owner address cannot be null, the sentinel or the Safe itself.
require(owner != address(0) && owner != SENTINEL_OWNERS && owner != address(this), "GS203");
// No duplicate owners allowed.
require(owners[owner] == address(0), "GS204");
owners[owner] = owners[SENTINEL_OWNERS];
owners[SENTINEL_OWNERS] = owner;
ownerCount++;
emit AddedOwner(owner);
// Change threshold if threshold was changed.
if (threshold != _threshold) changeThreshold(_threshold);
}
/**
* @notice Removes the owner `owner` from the Safe and updates the threshold to `_threshold`.
* @dev This can only be done via a Safe transaction.
* @param prevOwner Owner that pointed to the owner to be removed in the linked list
* @param owner Owner address to be removed.
* @param _threshold New threshold.
*/
function removeOwner(address prevOwner, address owner, uint256 _threshold) public authorized {
// Only allow to remove an owner, if threshold can still be reached.
require(ownerCount - 1 >= _threshold, "GS201");
// Validate owner address and check that it corresponds to owner index.
require(owner != address(0) && owner != SENTINEL_OWNERS, "GS203");
require(owners[prevOwner] == owner, "GS205");
owners[prevOwner] = owners[owner];
owners[owner] = address(0);
ownerCount--;
emit RemovedOwner(owner);
// Change threshold if threshold was changed.
if (threshold != _threshold) changeThreshold(_threshold);
}
/**
* @notice Replaces the owner `oldOwner` in the Safe with `newOwner`.
* @dev This can only be done via a Safe transaction.
* @param prevOwner Owner that pointed to the owner to be replaced in the linked list
* @param oldOwner Owner address to be replaced.
* @param newOwner New owner address.
*/
function swapOwner(address prevOwner, address oldOwner, address newOwner) public authorized {
// Owner address cannot be null, the sentinel or the Safe itself.
require(newOwner != address(0) && newOwner != SENTINEL_OWNERS && newOwner != address(this), "GS203");
// No duplicate owners allowed.
require(owners[newOwner] == address(0), "GS204");
// Validate oldOwner address and check that it corresponds to owner index.
require(oldOwner != address(0) && oldOwner != SENTINEL_OWNERS, "GS203");
require(owners[prevOwner] == oldOwner, "GS205");
owners[newOwner] = owners[oldOwner];
owners[prevOwner] = newOwner;
owners[oldOwner] = address(0);
emit RemovedOwner(oldOwner);
emit AddedOwner(newOwner);
}
/**
* @notice Changes the threshold of the Safe to `_threshold`.
* @dev This can only be done via a Safe transaction.
* @param _threshold New threshold.
*/
function changeThreshold(uint256 _threshold) public authorized {
// Validate that threshold is smaller than number of owners.
require(_threshold <= ownerCount, "GS201");
// There has to be at least one Safe owner.
require(_threshold >= 1, "GS202");
threshold = _threshold;
emit ChangedThreshold(threshold);
}
/**
* @notice Returns the number of required confirmations for a Safe transaction aka the threshold.
* @return Threshold number.
*/
function getThreshold() public view returns (uint256) {
return threshold;
}
/**
* @notice Returns if `owner` is an owner of the Safe.
* @return Boolean if owner is an owner of the Safe.
*/
function isOwner(address owner) public view returns (bool) {
return owner != SENTINEL_OWNERS && owners[owner] != address(0);
}
/**
* @notice Returns a list of Safe owners.
* @return Array of Safe owners.
*/
function getOwners() public view returns (address[] memory) {
address[] memory array = new address[](ownerCount);
// populate return array
uint256 index = 0;
address currentOwner = owners[SENTINEL_OWNERS];
while (currentOwner != SENTINEL_OWNERS) {
array[index] = currentOwner;
currentOwner = owners[currentOwner];
index++;
}
return array;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title Enum - Collection of enums used in Safe contracts.
* @author Richard Meissner - @rmeissner
*/
abstract contract Enum {
enum Operation {
Call,
DelegateCall
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title NativeCurrencyPaymentFallback - A contract that has a fallback to accept native currency payments.
* @author Richard Meissner - @rmeissner
*/
abstract contract NativeCurrencyPaymentFallback {
event SafeReceived(address indexed sender, uint256 value);
/**
* @notice Receive function accepts native currency transactions.
* @dev Emits an event with sender and received value.
*/
receive() external payable {
emit SafeReceived(msg.sender, msg.value);
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title SecuredTokenTransfer - Secure token transfer.
* @author Richard Meissner - @rmeissner
*/
abstract contract SecuredTokenTransfer {
/**
* @notice Transfers a token and returns a boolean if it was a success
* @dev It checks the return data of the transfer call and returns true if the transfer was successful.
* It doesn't check if the `token` address is a contract or not.
* @param token Token that should be transferred
* @param receiver Receiver to whom the token should be transferred
* @param amount The amount of tokens that should be transferred
* @return transferred Returns true if the transfer was successful
*/
function transferToken(address token, address receiver, uint256 amount) internal returns (bool transferred) {
// 0xa9059cbb - keccack("transfer(address,uint256)")
bytes memory data = abi.encodeWithSelector(0xa9059cbb, receiver, amount);
// solhint-disable-next-line no-inline-assembly
assembly {
// We write the return value to scratch space.
// See https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html#layout-in-memory
let success := call(sub(gas(), 10000), token, 0, add(data, 0x20), mload(data), 0, 0x20)
switch returndatasize()
case 0 {
transferred := success
}
case 0x20 {
transferred := iszero(or(iszero(success), iszero(mload(0))))
}
default {
transferred := 0
}
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title SelfAuthorized - Authorizes current contract to perform actions to itself.
* @author Richard Meissner - @rmeissner
*/
abstract contract SelfAuthorized {
function requireSelfCall() private view {
require(msg.sender == address(this), "GS031");
}
modifier authorized() {
// Modifiers are copied around during compilation. This is a function call as it minimized the bytecode size
requireSelfCall();
_;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title SignatureDecoder - Decodes signatures encoded as bytes
* @author Richard Meissner - @rmeissner
*/
abstract contract SignatureDecoder {
/**
* @notice Splits signature bytes into `uint8 v, bytes32 r, bytes32 s`.
* @dev Make sure to perform a bounds check for @param pos, to avoid out of bounds access on @param signatures
* The signature format is a compact form of {bytes32 r}{bytes32 s}{uint8 v}
* Compact means uint8 is not padded to 32 bytes.
* @param pos Which signature to read.
* A prior bounds check of this parameter should be performed, to avoid out of bounds access.
* @param signatures Concatenated {r, s, v} signatures.
* @return v Recovery ID or Safe signature type.
* @return r Output value r of the signature.
* @return s Output value s of the signature.
*/
function signatureSplit(bytes memory signatures, uint256 pos) internal pure returns (uint8 v, bytes32 r, bytes32 s) {
// solhint-disable-next-line no-inline-assembly
assembly {
let signaturePos := mul(0x41, pos)
r := mload(add(signatures, add(signaturePos, 0x20)))
s := mload(add(signatures, add(signaturePos, 0x40)))
/**
* Here we are loading the last 32 bytes, including 31 bytes
* of 's'. There is no 'mload8' to do this.
* 'byte' is not working due to the Solidity parser, so lets
* use the second best option, 'and'
*/
v := and(mload(add(signatures, add(signaturePos, 0x41))), 0xff)
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title Singleton - Base for singleton contracts (should always be the first super contract)
* This contract is tightly coupled to our proxy contract (see `proxies/SafeProxy.sol`)
* @author Richard Meissner - @rmeissner
*/
abstract contract Singleton {
// singleton always has to be the first declared variable to ensure the same location as in the Proxy contract.
// It should also always be ensured the address is stored alone (uses a full word)
address private singleton;
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title StorageAccessible - A generic base contract that allows callers to access all internal storage.
* @notice See https://github.com/gnosis/util-contracts/blob/bb5fe5fb5df6d8400998094fb1b32a178a47c3a1/contracts/StorageAccessible.sol
* It removes a method from the original contract not needed for the Safe contracts.
* @author Gnosis Developers
*/
abstract contract StorageAccessible {
/**
* @notice Reads `length` bytes of storage in the currents contract
* @param offset - the offset in the current contract's storage in words to start reading from
* @param length - the number of words (32 bytes) of data to read
* @return the bytes that were read.
*/
function getStorageAt(uint256 offset, uint256 length) public view returns (bytes memory) {
bytes memory result = new bytes(length * 32);
for (uint256 index = 0; index < length; index++) {
// solhint-disable-next-line no-inline-assembly
assembly {
let word := sload(add(offset, index))
mstore(add(add(result, 0x20), mul(index, 0x20)), word)
}
}
return result;
}
/**
* @dev Performs a delegatecall on a targetContract in the context of self.
* Internally reverts execution to avoid side effects (making it static).
*
* This method reverts with data equal to `abi.encode(bool(success), bytes(response))`.
* Specifically, the `returndata` after a call to this method will be:
* `success:bool || response.length:uint256 || response:bytes`.
*
* @param targetContract Address of the contract containing the code to execute.
* @param calldataPayload Calldata that should be sent to the target contract (encoded method name and arguments).
*/
function simulateAndRevert(address targetContract, bytes memory calldataPayload) external {
// solhint-disable-next-line no-inline-assembly
assembly {
let success := delegatecall(gas(), targetContract, add(calldataPayload, 0x20), mload(calldataPayload), 0, 0)
mstore(0x00, success)
mstore(0x20, returndatasize())
returndatacopy(0x40, 0, returndatasize())
revert(0, add(returndatasize(), 0x40))
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../../common/Enum.sol";
import "../../base/GuardManager.sol";
import "../../Safe.sol";
/**
* @title Debug Transaction Guard - Emits transaction events with extended information.
* @dev This guard is only meant as a development tool and example
* @author Richard Meissner - @rmeissner
*/
contract DebugTransactionGuard is BaseGuard {
// solhint-disable-next-line payable-fallback
fallback() external {
// We don't revert on fallback to avoid issues in case of a Safe upgrade
// E.g. The expected check method might change and then the Safe would be locked.
}
event TransactionDetails(
address indexed safe,
bytes32 indexed txHash,
address to,
uint256 value,
bytes data,
Enum.Operation operation,
uint256 safeTxGas,
bool usesRefund,
uint256 nonce,
bytes signatures,
address executor
);
event GasUsage(address indexed safe, bytes32 indexed txHash, uint256 indexed nonce, bool success);
mapping(bytes32 => uint256) public txNonces;
/**
* @notice Called by the Safe contract before a transaction is executed.
* @param to Destination address of Safe transaction.
* @param value Ether value of Safe transaction.
* @param data Data payload of Safe transaction.
* @param operation Operation type of Safe transaction.
* @param safeTxGas Gas that should be used for the Safe transaction.
* @param baseGas Gas costs that are independent of the transaction execution (e.g. base transaction fee, signature check, payment of the refund)
* @param gasPrice Gas price that should be used for the payment calculation.
* @param gasToken Token address (or 0 if ETH) that is used for the payment.
* @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
* @param signatures Signature data that should be verified. Can be packed ECDSA signature ({bytes32 r}{bytes32 s}{uint8 v}), contract signature (EIP-1271) or approved hash.
* @param executor Account executing the transaction.
*/
function checkTransaction(
address to,
uint256 value,
bytes memory data,
Enum.Operation operation,
uint256 safeTxGas,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
// solhint-disable-next-line no-unused-vars
address payable refundReceiver,
bytes memory signatures,
address executor
) external override {
uint256 nonce;
bytes32 txHash;
{
Safe safe = Safe(payable(msg.sender));
nonce = safe.nonce() - 1;
txHash = safe.getTransactionHash(to, value, data, operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, nonce);
}
emit TransactionDetails(msg.sender, txHash, to, value, data, operation, safeTxGas, gasPrice > 0, nonce, signatures, executor);
txNonces[txHash] = nonce;
}
/**
* @notice Called by the Safe contract after a transaction is executed.
* @param txHash Hash of the executed transaction.
* @param success True if the transaction was successful.
*/
function checkAfterExecution(bytes32 txHash, bool success) external override {
uint256 nonce = txNonces[txHash];
require(nonce != 0, "Could not get nonce");
txNonces[txHash] = 0;
emit GasUsage(msg.sender, txHash, nonce, success);
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../../common/Enum.sol";
import "../../base/GuardManager.sol";
import "../../Safe.sol";
/**
* @title DelegateCallTransactionGuard - Limits delegate calls to a specific target.
* @author Richard Meissner - @rmeissner
*/
contract DelegateCallTransactionGuard is BaseGuard {
address public immutable ALLOWED_TARGET;
constructor(address target) {
ALLOWED_TARGET = target;
}
// solhint-disable-next-line payable-fallback
fallback() external {
// We don't revert on fallback to avoid issues in case of a Safe upgrade
// E.g. The expected check method might change and then the Safe would be locked.
}
/**
* @notice Called by the Safe contract before a transaction is executed.
* @dev Reverts if the transaction is a delegate call to contract other than the allowed one.
* @param to Destination address of Safe transaction.
* @param operation Operation type of Safe transaction.
*/
function checkTransaction(
address to,
uint256,
bytes memory,
Enum.Operation operation,
uint256,
uint256,
uint256,
address,
// solhint-disable-next-line no-unused-vars
address payable,
bytes memory,
address
) external view override {
require(operation != Enum.Operation.DelegateCall || to == ALLOWED_TARGET, "This call is restricted");
}
function checkAfterExecution(bytes32, bool) external view override {}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../../common/Enum.sol";
import "../../base/GuardManager.sol";
import "../../Safe.sol";
interface ISafe {
function getOwners() external view returns (address[] memory);
}
/**
* @title OnlyOwnersGuard - Only allows owners to execute transactions.
* @author Richard Meissner - @rmeissner
*/
contract OnlyOwnersGuard is BaseGuard {
ISafe public safe;
constructor() {}
// solhint-disable-next-line payable-fallback
fallback() external {
// We don't revert on fallback to avoid issues in case of a Safe upgrade
// E.g. The expected check method might change and then the Safe would be locked.
}
/**
* @notice Called by the Safe contract before a transaction is executed.
* @dev Reverts if the transaction is not executed by an owner.
* @param msgSender Executor of the transaction.
*/
function checkTransaction(
address,
uint256,
bytes memory,
Enum.Operation,
uint256,
uint256,
uint256,
address,
// solhint-disable-next-line no-unused-vars
address payable,
bytes memory,
address msgSender
) external view override {
// Only owners can exec
address[] memory owners = ISafe(msg.sender).getOwners();
for (uint256 i = 0; i < owners.length; i++) {
if (owners[i] == msgSender) {
return;
}
}
// msg sender is not an owner
revert("msg sender is not allowed to exec");
}
function checkAfterExecution(bytes32, bool) external view override {}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../../common/Enum.sol";
import "../../base/GuardManager.sol";
import "../../Safe.sol";
/**
* @title ReentrancyTransactionGuard - Prevents reentrancy into the transaction execution function.
* @author Richard Meissner - @rmeissner
*/
contract ReentrancyTransactionGuard is BaseGuard {
bytes32 internal constant GUARD_STORAGE_SLOT = keccak256("reentrancy_guard.guard.struct");
struct GuardValue {
bool active;
}
// solhint-disable-next-line payable-fallback
fallback() external {
// We don't revert on fallback to avoid issues in case of a Safe upgrade
// E.g. The expected check method might change and then the Safe would be locked.
}
/**
* @notice Returns the guard value for the current context.
* @dev The guard value is stored in a slot that is unique to the contract instance and the function in which it is called.
* @return guard The guard value.
*/
function getGuard() internal pure returns (GuardValue storage guard) {
bytes32 slot = GUARD_STORAGE_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
guard.slot := slot
}
}
/**
* @notice Called by the Safe contract before a transaction is executed.
* @dev Reverts if reentrancy is detected.
*/
function checkTransaction(
address,
uint256,
bytes memory,
Enum.Operation,
uint256,
uint256,
uint256,
address,
// solhint-disable-next-line no-unused-vars
address payable,
bytes memory,
address
) external override {
GuardValue storage guard = getGuard();
require(!guard.active, "Reentrancy detected");
guard.active = true;
}
/**
* @notice Called by the Safe contract after a transaction is executed.
* @dev Resets the guard value.
*/
function checkAfterExecution(bytes32, bool) external override {
getGuard().active = false;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../../libraries/SafeStorage.sol";
/**
* @title Migration - Migrates a Safe contract from 1.3.0 to 1.2.0
* @author Richard Meissner - @rmeissner
*/
contract Migration is SafeStorage {
bytes32 private constant DOMAIN_SEPARATOR_TYPEHASH = 0x035aff83d86937d35b32e04f0ddc6ff469290eef2f1b692d8a815c89404d4749;
address public immutable migrationSingleton;
address public immutable safe120Singleton;
constructor(address targetSingleton) {
// Singleton address cannot be zero address.
require(targetSingleton != address(0), "Invalid singleton address provided");
safe120Singleton = targetSingleton;
migrationSingleton = address(this);
}
event ChangedMasterCopy(address singleton);
/**
* @notice Migrates the Safe to the Singleton contract at `migrationSingleton`.
* @dev This can only be called via a delegatecall.
*/
function migrate() public {
require(address(this) != migrationSingleton, "Migration should only be called via delegatecall");
singleton = safe120Singleton;
_deprecatedDomainSeparator = keccak256(abi.encode(DOMAIN_SEPARATOR_TYPEHASH, this));
emit ChangedMasterCopy(singleton);
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title SafeMath
* @notice Math operations with safety checks that revert on error (overflow/underflow)
*/
library SafeMath {
/**
* @notice Multiplies two numbers, reverts on overflow.
* @param a First number
* @param b Second number
* @return Product of a and b
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @notice Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
* @param a First number
* @param b Second number
* @return Difference of a and b
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @notice Adds two numbers, reverts on overflow.
* @param a First number
* @param b Second number
* @return Sum of a and b
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @notice Returns the largest of two numbers.
* @param a First number
* @param b Second number
* @return Largest of a and b
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./TokenCallbackHandler.sol";
import "../interfaces/ISignatureValidator.sol";
import "../Safe.sol";
/**
* @title Compatibility Fallback Handler - Provides compatibility between pre 1.3.0 and 1.3.0+ Safe contracts.
* @author Richard Meissner - @rmeissner
*/
contract CompatibilityFallbackHandler is TokenCallbackHandler, ISignatureValidator {
// keccak256("SafeMessage(bytes message)");
bytes32 private constant SAFE_MSG_TYPEHASH = 0x60b3cbf8b4a223d68d641b3b6ddf9a298e7f33710cf3d3a9d1146b5a6150fbca;
bytes4 internal constant SIMULATE_SELECTOR = bytes4(keccak256("simulate(address,bytes)"));
address internal constant SENTINEL_MODULES = address(0x1);
bytes4 internal constant UPDATED_MAGIC_VALUE = 0x1626ba7e;
/**
* @notice Legacy EIP-1271 signature validation method.
* @dev Implementation of ISignatureValidator (see `interfaces/ISignatureValidator.sol`)
* @param _data Arbitrary length data signed on the behalf of address(msg.sender).
* @param _signature Signature byte array associated with _data.
* @return The EIP-1271 magic value.
*/
function isValidSignature(bytes memory _data, bytes memory _signature) public view override returns (bytes4) {
// Caller should be a Safe
Safe safe = Safe(payable(msg.sender));
bytes memory messageData = encodeMessageDataForSafe(safe, _data);
bytes32 messageHash = keccak256(messageData);
if (_signature.length == 0) {
require(safe.signedMessages(messageHash) != 0, "Hash not approved");
} else {
safe.checkSignatures(messageHash, messageData, _signature);
}
return EIP1271_MAGIC_VALUE;
}
/**
* @dev Returns the hash of a message to be signed by owners.
* @param message Raw message bytes.
* @return Message hash.
*/
function getMessageHash(bytes memory message) public view returns (bytes32) {
return getMessageHashForSafe(Safe(payable(msg.sender)), message);
}
/**
* @dev Returns the pre-image of the message hash (see getMessageHashForSafe).
* @param safe Safe to which the message is targeted.
* @param message Message that should be encoded.
* @return Encoded message.
*/
function encodeMessageDataForSafe(Safe safe, bytes memory message) public view returns (bytes memory) {
bytes32 safeMessageHash = keccak256(abi.encode(SAFE_MSG_TYPEHASH, keccak256(message)));
return abi.encodePacked(bytes1(0x19), bytes1(0x01), safe.domainSeparator(), safeMessageHash);
}
/**
* @dev Returns hash of a message that can be signed by owners.
* @param safe Safe to which the message is targeted.
* @param message Message that should be hashed.
* @return Message hash.
*/
function getMessageHashForSafe(Safe safe, bytes memory message) public view returns (bytes32) {
return keccak256(encodeMessageDataForSafe(safe, message));
}
/**
* @notice Implementation of updated EIP-1271 signature validation method.
* @param _dataHash Hash of the data signed on the behalf of address(msg.sender)
* @param _signature Signature byte array associated with _dataHash
* @return Updated EIP1271 magic value if signature is valid, otherwise 0x0
*/
function isValidSignature(bytes32 _dataHash, bytes calldata _signature) external view returns (bytes4) {
ISignatureValidator validator = ISignatureValidator(msg.sender);
bytes4 value = validator.isValidSignature(abi.encode(_dataHash), _signature);
return (value == EIP1271_MAGIC_VALUE) ? UPDATED_MAGIC_VALUE : bytes4(0);
}
/**
* @dev Returns array of first 10 modules.
* @return Array of modules.
*/
function getModules() external view returns (address[] memory) {
// Caller should be a Safe
Safe safe = Safe(payable(msg.sender));
(address[] memory array, ) = safe.getModulesPaginated(SENTINEL_MODULES, 10);
return array;
}
/**
* @dev Performs a delegatecall on a targetContract in the context of self.
* Internally reverts execution to avoid side effects (making it static). Catches revert and returns encoded result as bytes.
* @dev Inspired by https://github.com/gnosis/util-contracts/blob/bb5fe5fb5df6d8400998094fb1b32a178a47c3a1/contracts/StorageAccessible.sol
* @param targetContract Address of the contract containing the code to execute.
* @param calldataPayload Calldata that should be sent to the target contract (encoded method name and arguments).
*/
function simulate(address targetContract, bytes calldata calldataPayload) external returns (bytes memory response) {
/**
* Suppress compiler warnings about not using parameters, while allowing
* parameters to keep names for documentation purposes. This does not
* generate code.
*/
targetContract;
calldataPayload;
// solhint-disable-next-line no-inline-assembly
assembly {
let internalCalldata := mload(0x40)
/**
* Store `simulateAndRevert.selector`.
* String representation is used to force right padding
*/
mstore(internalCalldata, "\xb4\xfa\xba\x09")
/**
* Abuse the fact that both this and the internal methods have the
* same signature, and differ only in symbol name (and therefore,
* selector) and copy calldata directly. This saves us approximately
* 250 bytes of code and 300 gas at runtime over the
* `abi.encodeWithSelector` builtin.
*/
calldatacopy(add(internalCalldata, 0x04), 0x04, sub(calldatasize(), 0x04))
/**
* `pop` is required here by the compiler, as top level expressions
* can't have return values in inline assembly. `call` typically
* returns a 0 or 1 value indicated whether or not it reverted, but
* since we know it will always revert, we can safely ignore it.
*/
pop(
call(
gas(),
// address() has been changed to caller() to use the implementation of the Safe
caller(),
0,
internalCalldata,
calldatasize(),
/**
* The `simulateAndRevert` call always reverts, and
* instead encodes whether or not it was successful in the return
* data. The first 32-byte word of the return data contains the
* `success` value, so write it to memory address 0x00 (which is
* reserved Solidity scratch space and OK to use).
*/
0x00,
0x20
)
)
/**
* Allocate and copy the response bytes, making sure to increment
* the free memory pointer accordingly (in case this method is
* called as an internal function). The remaining `returndata[0x20:]`
* contains the ABI encoded response bytes, so we can just write it
* as is to memory.
*/
let responseSize := sub(returndatasize(), 0x20)
response := mload(0x40)
mstore(0x40, add(response, responseSize))
returndatacopy(response, 0x20, responseSize)
if iszero(mload(0x00)) {
revert(add(response, 0x20), mload(response))
}
}
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../interfaces/ERC1155TokenReceiver.sol";
import "../interfaces/ERC721TokenReceiver.sol";
import "../interfaces/ERC777TokensRecipient.sol";
import "../interfaces/IERC165.sol";
/**
* @title Default Callback Handler - Handles supported tokens' callbacks, allowing Safes receiving these tokens.
* @author Richard Meissner - @rmeissner
*/
contract TokenCallbackHandler is ERC1155TokenReceiver, ERC777TokensRecipient, ERC721TokenReceiver, IERC165 {
/**
* @notice Handles ERC1155 Token callback.
* return Standardized onERC1155Received return value.
*/
function onERC1155Received(address, address, uint256, uint256, bytes calldata) external pure override returns (bytes4) {
return 0xf23a6e61;
}
/**
* @notice Handles ERC1155 Token batch callback.
* return Standardized onERC1155BatchReceived return value.
*/
function onERC1155BatchReceived(
address,
address,
uint256[] calldata,
uint256[] calldata,
bytes calldata
) external pure override returns (bytes4) {
return 0xbc197c81;
}
/**
* @notice Handles ERC721 Token callback.
* return Standardized onERC721Received return value.
*/
function onERC721Received(address, address, uint256, bytes calldata) external pure override returns (bytes4) {
return 0x150b7a02;
}
/**
* @notice Handles ERC777 Token callback.
* return nothing (not standardized)
*/
function tokensReceived(address, address, address, uint256, bytes calldata, bytes calldata) external pure override {
// We implement this for completeness, doesn't really have any value
}
/**
* @notice Implements ERC165 interface support for ERC1155TokenReceiver, ERC721TokenReceiver and IERC165.
* @param interfaceId Id of the interface.
* @return if the interface is supported.
*/
function supportsInterface(bytes4 interfaceId) external view virtual override returns (bool) {
return
interfaceId == type(ERC1155TokenReceiver).interfaceId ||
interfaceId == type(ERC721TokenReceiver).interfaceId ||
interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
// Note: The ERC-165 identifier for this interface is 0x4e2312e0.
interface ERC1155TokenReceiver {
/**
* @notice Handle the receipt of a single ERC1155 token type.
* @dev An ERC1155-compliant smart contract MUST call this function on the token recipient contract, at the end of a `safeTransferFrom` after the balance has been updated.
* This function MUST return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` (i.e. 0xf23a6e61) if it accepts the transfer.
* This function MUST revert if it rejects the transfer.
* Return of any other value than the prescribed keccak256 generated value MUST result in the transaction being reverted by the caller.
* @param _operator The address which initiated the transfer (i.e. msg.sender).
* @param _from The address which previously owned the token.
* @param _id The ID of the token being transferred.
* @param _value The amount of tokens being transferred.
* @param _data Additional data with no specified format.
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`.
*/
function onERC1155Received(
address _operator,
address _from,
uint256 _id,
uint256 _value,
bytes calldata _data
) external returns (bytes4);
/**
* @notice Handle the receipt of multiple ERC1155 token types.
* @dev An ERC1155-compliant smart contract MUST call this function on the token recipient contract, at the end of a `safeBatchTransferFrom` after the balances have been updated.
* This function MUST return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` (i.e. 0xbc197c81) if it accepts the transfer(s).
* This function MUST revert if it rejects the transfer(s).
* Return of any other value than the prescribed keccak256 generated value MUST result in the transaction being reverted by the caller.
* @param _operator The address which initiated the batch transfer (i.e. msg.sender).
* @param _from The address which previously owned the token.
* @param _ids An array containing ids of each token being transferred (order and length must match _values array).
* @param _values An array containing amounts of each token being transferred (order and length must match _ids array).
* @param _data Additional data with no specified format.
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`.
*/
function onERC1155BatchReceived(
address _operator,
address _from,
uint256[] calldata _ids,
uint256[] calldata _values,
bytes calldata _data
) external returns (bytes4);
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @dev Note: the ERC-165 identifier for this interface is 0x150b7a02.
interface ERC721TokenReceiver {
/**
* @notice Handle the receipt of an NFT
* @dev The ERC721 smart contract calls this function on the recipient
* after a `transfer`. This function MAY throw to revert and reject the
* transfer. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the contract address is always the message sender.
* @param _operator The address which called `safeTransferFrom` function.
* @param _from The address which previously owned the token.
* @param _tokenId The NFT identifier which is being transferred.
* @param _data Additional data with no specified format.
* @return `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`.
* unless throwing
*/
function onERC721Received(address _operator, address _from, uint256 _tokenId, bytes calldata _data) external returns (bytes4);
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title ERC777TokensRecipient
* @dev Interface for contracts that will be called with the ERC777 token's `tokensReceived` method.
* The contract receiving the tokens must implement this interface in order to receive the tokens.
*/
interface ERC777TokensRecipient {
/**
* @dev Called by the ERC777 token contract after a successful transfer or a minting operation.
* @param operator The address of the operator performing the transfer or minting operation.
* @param from The address of the sender.
* @param to The address of the recipient.
* @param amount The amount of tokens that were transferred or minted.
* @param data Additional data that was passed during the transfer or minting operation.
* @param operatorData Additional data that was passed by the operator during the transfer or minting operation.
*/
function tokensReceived(
address operator,
address from,
address to,
uint256 amount,
bytes calldata data,
bytes calldata operatorData
) external;
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @notice More details at https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/introspection/IERC165.sol
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by `interfaceId`.
* See the corresponding EIP section
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
contract ISignatureValidatorConstants {
// bytes4(keccak256("isValidSignature(bytes,bytes)")
bytes4 internal constant EIP1271_MAGIC_VALUE = 0x20c13b0b;
}
abstract contract ISignatureValidator is ISignatureValidatorConstants {
/**
* @notice Legacy EIP1271 method to validate a signature.
* @param _data Arbitrary length data signed on the behalf of address(this).
* @param _signature Signature byte array associated with _data.
*
* MUST return the bytes4 magic value 0x20c13b0b when function passes.
* MUST NOT modify state (using STATICCALL for solc < 0.5, view modifier for solc > 0.5)
* MUST allow external calls
*/
function isValidSignature(bytes memory _data, bytes memory _signature) public view virtual returns (bytes4);
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import {SafeStorage} from "../libraries/SafeStorage.sol";
interface ISafe {
function setFallbackHandler(address handler) external;
}
/**
* @title Migration Contract for Safe Upgrade
* @notice This is a generic contract that facilitates Safe and SafeL2 proxy contracts to migrate their singleton address.
* The supported target Safe version is immutable and set in the constructor during the deployment of the contract.
* This contract also supports migration with fallback handler update.
* @author @safe-global/safe-protocol
* @dev IMPORTANT: The library is intended to be used with the Safe standard proxy that stores the singleton address
* at the storage slot 0. Use at your own risk with custom proxy implementations. The contract will allow invocations
* to the migration functions only via delegatecall.
*/
contract SafeMigration is SafeStorage {
/**
* @notice Address of this contract
*/
address public immutable MIGRATION_SINGLETON;
/**
* @notice Address of the Safe Singleton implementation
*/
address public immutable SAFE_SINGLETON;
/**
* @notice Address of the Safe Singleton (L2) implementation
*/
address public immutable SAFE_L2_SINGLETON;
/**
* @notice Address of the Fallback Handler
*/
address public immutable SAFE_FALLBACK_HANDLER;
/**
* @notice Event indicating a change of a singleton address. Named master copy here for legacy reasons.
* @param singleton New master copy address
*/
event ChangedMasterCopy(address singleton);
/**
* @notice Modifier to make a function callable via delegatecall only.
* If the function is called via a regular call, it will revert.
*/
modifier onlyDelegateCall() {
require(address(this) != MIGRATION_SINGLETON, "Migration should only be called via delegatecall");
_;
}
/**
* @notice Constructor
* @param safeSingleton Address of the Safe Singleton implementation
* @param safeL2Singleton Address of the SafeL2 Singleton implementation
* @param fallbackHandler Address of the fallback handler implementation
*/
constructor(address safeSingleton, address safeL2Singleton, address fallbackHandler) {
MIGRATION_SINGLETON = address(this);
require(hasCode(safeSingleton), "Safe Singleton is not deployed");
require(hasCode(safeL2Singleton), "Safe Singleton (L2) is not deployed");
require(hasCode(fallbackHandler), "fallback handler is not deployed");
SAFE_SINGLETON = safeSingleton;
SAFE_L2_SINGLETON = safeL2Singleton;
SAFE_FALLBACK_HANDLER = fallbackHandler;
}
/**
* @notice Migrate the Safe contract to a new Safe Singleton implementation.
*/
function migrateSingleton() public onlyDelegateCall {
singleton = SAFE_SINGLETON;
emit ChangedMasterCopy(SAFE_SINGLETON);
}
/**
* @notice Migrate to Safe Singleton and set the fallback handler. This function is intended to be used when migrating
* a Safe to a version which also requires updating fallback handler.
*/
function migrateWithFallbackHandler() external onlyDelegateCall {
migrateSingleton();
ISafe(address(this)).setFallbackHandler(SAFE_FALLBACK_HANDLER);
}
/**
* @notice Migrate the Safe contract to a new Safe Singleton (L2) implementation.
*/
function migrateL2Singleton() public onlyDelegateCall {
singleton = SAFE_L2_SINGLETON;
emit ChangedMasterCopy(SAFE_L2_SINGLETON);
}
/**
* @notice Migrate to Safe Singleton (L2) and set the fallback handler. This function is intended to be used when migrating
* a Safe to a version which also requires updating fallback handler.
*/
function migrateL2WithFallbackHandler() external onlyDelegateCall {
migrateL2Singleton();
ISafe(address(this)).setFallbackHandler(SAFE_FALLBACK_HANDLER);
}
/**
* @notice Checks whether an account has code.
* @param account The address of the account to be checked.
* @return A boolean value indicating whether the address has code (true) or not (false).
* @dev This function relies on the `extcodesize` assembly opcode to determine whether an address has code.
* It does not reliably determine whether or not an address is a smart contract or an EOA.
*/
function hasCode(address account) internal view returns (bool) {
uint256 size;
/* solhint-disable no-inline-assembly */
/// @solidity memory-safe-assembly
assembly {
size := extcodesize(account)
}
/* solhint-enable no-inline-assembly */
return size > 0;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
* @title SafeStorage - Storage layout of the Safe contracts to be used in libraries.
* @dev Should be always the first base contract of a library that is used with a Safe.
* @author Richard Meissner - @rmeissner
*/
contract SafeStorage {
// From /common/Singleton.sol
address internal singleton;
// From /common/ModuleManager.sol
mapping(address => address) internal modules;
// From /common/OwnerManager.sol
mapping(address => address) internal owners;
uint256 internal ownerCount;
uint256 internal threshold;
// From /Safe.sol
uint256 internal nonce;
bytes32 internal _deprecatedDomainSeparator;
mapping(bytes32 => uint256) internal signedMessages;
mapping(address => mapping(bytes32 => uint256)) internal approvedHashes;
}
// SPDX-License-Identifier: LGPL-3.0-only
/* solhint-disable one-contract-per-file */
pragma solidity >=0.7.0 <0.9.0;
import {SafeStorage} from "../libraries/SafeStorage.sol";
import {Enum} from "../common/Enum.sol";
interface ISafe {
// solhint-disable-next-line
function VERSION() external view returns (string memory);
function setFallbackHandler(address handler) external;
}
/**
* @title Migration Contract for updating a Safe from 1.1.1/1.3.0/1.4.1 versions to a L2 version. Useful when replaying a Safe from a non L2 network in a L2 network.
* @notice This contract facilitates the migration of a Safe contract from version 1.1.1 to 1.3.0/1.4.1 L2, 1.3.0 to 1.3.0L2 or from 1.4.1 to 1.4.1L2
* Other versions are not supported
* @dev IMPORTANT: The migration will only work with proxies that store the implementation address in the storage slot 0.
*/
contract SafeToL2Migration is SafeStorage {
// Address of this contract
address public immutable MIGRATION_SINGLETON;
/**
* @notice Constructor
* @dev Initializes the migrationSingleton with the contract's own address.
*/
constructor() {
MIGRATION_SINGLETON = address(this);
}
/**
* @notice Event indicating a change of master copy address.
* @param singleton New master copy address
*/
event ChangedMasterCopy(address singleton);
event SafeSetup(address indexed initiator, address[] owners, uint256 threshold, address initializer, address fallbackHandler);
event SafeMultiSigTransaction(
address to,
uint256 value,
bytes data,
Enum.Operation operation,
uint256 safeTxGas,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
address payable refundReceiver,
bytes signatures,
// We combine nonce, sender and threshold into one to avoid stack too deep
// Dev note: additionalInfo should not contain `bytes`, as this complicates decoding
bytes additionalInfo
);
/**
* @notice Modifier to make a function callable via delegatecall only.
* If the function is called via a regular call, it will revert.
*/
modifier onlyDelegateCall() {
require(address(this) != MIGRATION_SINGLETON, "Migration should only be called via delegatecall");
_;
}
/**
* @notice Modifier to prevent using initialized Safes.
* If Safe has a nonce higher than 0, it will revert
*/
modifier onlyNonceZero() {
// Nonce is increased before executing a tx, so first executed tx will have nonce=1
require(nonce == 1, "Safe must have not executed any tx");
_;
}
/**
* @dev Internal function with common migration steps, changes the singleton and emits SafeMultiSigTransaction event
*/
function migrate(address l2Singleton, bytes memory functionData) private {
singleton = l2Singleton;
// Encode nonce, sender, threshold
bytes memory additionalInfo = abi.encode(0, msg.sender, threshold);
// Simulate a L2 transaction so Safe Tx Service indexer picks up the Safe
emit SafeMultiSigTransaction(
MIGRATION_SINGLETON,
0,
functionData,
Enum.Operation.DelegateCall,
0,
0,
0,
address(0),
payable(address(0)),
"", // We cannot detect signatures
additionalInfo
);
emit ChangedMasterCopy(l2Singleton);
}
/**
* @notice Migrate from Safe 1.3.0/1.4.1 Singleton (L1) to the same version provided L2 singleton
* Safe is required to have nonce 0 so backend can support it after the migration
* @dev This function should only be called via a delegatecall to perform the upgrade.
* Singletons versions will be compared, so it implies that contracts exist
*/
function migrateToL2(address l2Singleton) external onlyDelegateCall onlyNonceZero {
address _singleton = singleton;
require(_singleton != l2Singleton, "Safe is already using the singleton");
bytes32 oldSingletonVersion = keccak256(abi.encodePacked(ISafe(_singleton).VERSION()));
bytes32 newSingletonVersion = keccak256(abi.encodePacked(ISafe(l2Singleton).VERSION()));
require(oldSingletonVersion == newSingletonVersion, "L2 singleton must match current version singleton");
// There's no way to make sure if address is a valid singleton, unless we configure the contract for every chain
require(
newSingletonVersion == keccak256(abi.encodePacked("1.3.0")) || newSingletonVersion == keccak256(abi.encodePacked("1.4.1")),
"Provided singleton version is not supported"
);
// 0xef2624ae - bytes4(keccak256("migrateToL2(address)"))
bytes memory functionData = abi.encodeWithSelector(0xef2624ae, l2Singleton);
migrate(l2Singleton, functionData);
}
/**
* @notice Migrate from Safe 1.1.1 Singleton to 1.3.0 or 1.4.1 L2
* Safe is required to have nonce 0 so backend can support it after the migration
* @dev This function should only be called via a delegatecall to perform the upgrade.
* Singletons version will be checked, so it implies that contracts exist.
* A valid and compatible fallbackHandler needs to be provided, only existence will be checked.
*/
function migrateFromV111(address l2Singleton, address fallbackHandler) external onlyDelegateCall onlyNonceZero {
require(isContract(fallbackHandler), "fallbackHandler is not a contract");
bytes32 oldSingletonVersion = keccak256(abi.encodePacked(ISafe(singleton).VERSION()));
require(oldSingletonVersion == keccak256(abi.encodePacked("1.1.1")), "Provided singleton version is not supported");
bytes32 newSingletonVersion = keccak256(abi.encodePacked(ISafe(l2Singleton).VERSION()));
require(
newSingletonVersion == keccak256(abi.encodePacked("1.3.0")) || newSingletonVersion == keccak256(abi.encodePacked("1.4.1")),
"Provided singleton version is not supported"
);
ISafe safe = ISafe(address(this));
safe.setFallbackHandler(fallbackHandler);
// Safes < 1.3.0 did not emit SafeSetup, so Safe Tx Service backend needs the event to index the Safe
emit SafeSetup(MIGRATION_SINGLETON, getOwners(), threshold, address(0), fallbackHandler);
// 0xd9a20812 - bytes4(keccak256("migrateFromV111(address,address)"))
bytes memory functionData = abi.encodeWithSelector(0xd9a20812, l2Singleton, fallbackHandler);
migrate(l2Singleton, functionData);
}
/**
* @notice Checks whether an Ethereum address corresponds to a contract or an externally owned account (EOA).
* @param account The Ethereum address to be checked.
* @return A boolean value indicating whether the address is associated with a contract (true) or an EOA (false).
* @dev This function relies on the `extcodesize` assembly opcode to determine whether an address is a contract.
* It may return incorrect results in some edge cases (see documentation for details).
* Developers should use caution when relying on the results of this function for critical decision-making.
*/
function isContract(address account) internal view returns (bool) {
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
// If the code size is greater than 0, it is a contract; otherwise, it is an EOA.
return size > 0;
}
/**
* @notice Returns a list of Safe owners.
* @dev This function is copied from `OwnerManager.sol` and takes advantage of the fact that
* migration happens with a `DELEGATECALL` in the context of the migrating account, which allows
* us to read the owners directly from storage and avoid the additional overhead of a `CALL`
* into the account implementation. Note that we can rely on the memory layout of the {owners}
* @return Array of Safe owners.
*/
function getOwners() internal view returns (address[] memory) {
address[] memory array = new address[](ownerCount);
address sentinelOwners = address(0x1);
// populate return array
uint256 index = 0;
address currentOwner = owners[sentinelOwners];
while (currentOwner != sentinelOwners) {
array[index] = currentOwner;
currentOwner = owners[currentOwner];
index++;
}
return array;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import {SafeStorage} from "../libraries/SafeStorage.sol";
/**
* @title Safe to L2 Setup Contract
* @dev This contract expects the singleton to be the {Safe} by default. Even if there are more
* {SafeL2} proxies deployed, the average gas cost on L2s is significantly lower, making the
* current design more economically efficient overall.
* @notice This contract facilitates the deployment of a Safe to the same address on all networks by
* automatically changing the singleton to the L2 version when not on chain ID 1.
*/
contract SafeToL2Setup is SafeStorage {
/**
* @dev Address of the contract.
* This is used to ensure that the contract is only ever `DELEGATECALL`-ed.
*/
address private immutable SELF;
/**
* @notice Event indicating a change of master copy address.
* @param singleton New master copy address
*/
event ChangedMasterCopy(address singleton);
/**
* @notice Initializes a new {SafeToL2Setup} instance.
*/
constructor() {
SELF = address(this);
}
/**
* @notice Modifier ensure a function is only called via `DELEGATECALL`. Will revert otherwise.
*/
modifier onlyDelegateCall() {
require(address(this) != SELF, "SafeToL2Setup should only be called via delegatecall");
_;
}
/**
* @notice Modifier to prevent using initialized Safes.
*/
modifier onlyNonceZero() {
require(nonce == 0, "Safe must have not executed any tx");
_;
}
/**
* @notice Modifier to ensure that the specified account is a contract.
*
*/
modifier onlyContract(address account) {
require(codeSize(account) != 0, "Account doesn't contain code");
_;
}
/**
* @notice Setup the Safe with the provided L2 singleton if needed.
* @dev This function checks that the chain ID is not 1, and if it isn't updates the singleton
* to the provided L2 singleton.
*/
function setupToL2(address l2Singleton) external onlyDelegateCall onlyNonceZero onlyContract(l2Singleton) {
if (chainId() != 1) {
singleton = l2Singleton;
emit ChangedMasterCopy(l2Singleton);
}
}
/**
* @notice Returns the current chain ID.
*/
function chainId() private view returns (uint256 result) {
/* solhint-disable no-inline-assembly */
/// @solidity memory-safe-assembly
assembly {
result := chainid()
}
/* solhint-enable no-inline-assembly */
}
/**
* @notice Returns the code size of the specified account.
*/
function codeSize(address account) internal view returns (uint256 result) {
/* solhint-disable no-inline-assembly */
/// @solidity memory-safe-assembly
assembly {
result := extcodesize(account)
}
/* solhint-enable no-inline-assembly */
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./SafeStorage.sol";
import "../Safe.sol";
/**
* @title SignMessageLib - Allows to sign messages on-chain by writing the signed message hashes on-chain.
* @author Richard Meissner - @rmeissner
*/
contract SignMessageLib is SafeStorage {
// keccak256("SafeMessage(bytes message)");
bytes32 private constant SAFE_MSG_TYPEHASH = 0x60b3cbf8b4a223d68d641b3b6ddf9a298e7f33710cf3d3a9d1146b5a6150fbca;
event SignMsg(bytes32 indexed msgHash);
/**
* @notice Marks a message (`_data`) as signed.
* @dev Can be verified using EIP-1271 validation method by passing the pre-image of the message hash and empty bytes as the signature.
* @param _data Arbitrary length data that should be marked as signed on the behalf of address(this).
*/
function signMessage(bytes calldata _data) external {
bytes32 msgHash = getMessageHash(_data);
signedMessages[msgHash] = 1;
emit SignMsg(msgHash);
}
/**
* @dev Returns hash of a message that can be signed by owners.
* @param message Message that should be hashed.
* @return Message hash.
*/
function getMessageHash(bytes memory message) public view returns (bytes32) {
bytes32 safeMessageHash = keccak256(abi.encode(SAFE_MSG_TYPEHASH, keccak256(message)));
return keccak256(abi.encodePacked(bytes1(0x19), bytes1(0x01), Safe(payable(address(this))).domainSeparator(), safeMessageHash));
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./base/ModuleManager.sol";
import "./base/OwnerManager.sol";
import "./base/FallbackManager.sol";
import "./base/GuardManager.sol";
import "./common/NativeCurrencyPaymentFallback.sol";
import "./common/Singleton.sol";
import "./common/SignatureDecoder.sol";
import "./common/SecuredTokenTransfer.sol";
import "./common/StorageAccessible.sol";
import "./interfaces/ISignatureValidator.sol";
import "./external/SafeMath.sol";
/**
* @title Safe - A multisignature wallet with support for confirmations using signed messages based on EIP-712.
* @dev Most important concepts:
* - Threshold: Number of required confirmations for a Safe transaction.
* - Owners: List of addresses that control the Safe. They are the only ones that can add/remove owners, change the threshold and
* approve transactions. Managed in `OwnerManager`.
* - Transaction Hash: Hash of a transaction is calculated using the EIP-712 typed structured data hashing scheme.
* - Nonce: Each transaction should have a different nonce to prevent replay attacks.
* - Signature: A valid signature of an owner of the Safe for a transaction hash.
* - Guard: Guard is a contract that can execute pre- and post- transaction checks. Managed in `GuardManager`.
* - Modules: Modules are contracts that can be used to extend the write functionality of a Safe. Managed in `ModuleManager`.
* - Fallback: Fallback handler is a contract that can provide additional read-only functional for Safe. Managed in `FallbackManager`.
* Note: This version of the implementation contract doesn't emit events for the sake of gas efficiency and therefore requires a tracing node for indexing/
* For the events-based implementation see `SafeL2.sol`.
* @author Stefan George - @Georgi87
* @author Richard Meissner - @rmeissner
*/
contract Safe is
Singleton,
NativeCurrencyPaymentFallback,
ModuleManager,
OwnerManager,
SignatureDecoder,
SecuredTokenTransfer,
ISignatureValidatorConstants,
FallbackManager,
StorageAccessible,
GuardManager
{
using SafeMath for uint256;
string public constant VERSION = "1.4.1";
// keccak256(
// "EIP712Domain(uint256 chainId,address verifyingContract)"
// );
bytes32 private constant DOMAIN_SEPARATOR_TYPEHASH = 0x47e79534a245952e8b16893a336b85a3d9ea9fa8c573f3d803afb92a79469218;
// keccak256(
// "SafeTx(address to,uint256 value,bytes data,uint8 operation,uint256 safeTxGas,uint256 baseGas,uint256 gasPrice,address gasToken,address refundReceiver,uint256 nonce)"
// );
bytes32 private constant SAFE_TX_TYPEHASH = 0xbb8310d486368db6bd6f849402fdd73ad53d316b5a4b2644ad6efe0f941286d8;
event SafeSetup(address indexed initiator, address[] owners, uint256 threshold, address initializer, address fallbackHandler);
event ApproveHash(bytes32 indexed approvedHash, address indexed owner);
event SignMsg(bytes32 indexed msgHash);
event ExecutionFailure(bytes32 indexed txHash, uint256 payment);
event ExecutionSuccess(bytes32 indexed txHash, uint256 payment);
uint256 public nonce;
bytes32 private _deprecatedDomainSeparator;
// Mapping to keep track of all message hashes that have been approved by ALL REQUIRED owners
mapping(bytes32 => uint256) public signedMessages;
// Mapping to keep track of all hashes (message or transaction) that have been approved by ANY owners
mapping(address => mapping(bytes32 => uint256)) public approvedHashes;
// This constructor ensures that this contract can only be used as a singleton for Proxy contracts
constructor() {
/**
* By setting the threshold it is not possible to call setup anymore,
* so we create a Safe with 0 owners and threshold 1.
* This is an unusable Safe, perfect for the singleton
*/
threshold = 1;
}
/**
* @notice Sets an initial storage of the Safe contract.
* @dev This method can only be called once.
* If a proxy was created without setting up, anyone can call setup and claim the proxy.
* @param _owners List of Safe owners.
* @param _threshold Number of required confirmations for a Safe transaction.
* @param to Contract address for optional delegate call.
* @param data Data payload for optional delegate call.
* @param fallbackHandler Handler for fallback calls to this contract
* @param paymentToken Token that should be used for the payment (0 is ETH)
* @param payment Value that should be paid
* @param paymentReceiver Address that should receive the payment (or 0 if tx.origin)
*/
function setup(
address[] calldata _owners,
uint256 _threshold,
address to,
bytes calldata data,
address fallbackHandler,
address paymentToken,
uint256 payment,
address payable paymentReceiver
) external {
// setupOwners checks if the Threshold is already set, therefore preventing that this method is called twice
setupOwners(_owners, _threshold);
if (fallbackHandler != address(0)) internalSetFallbackHandler(fallbackHandler);
// As setupOwners can only be called if the contract has not been initialized we don't need a check for setupModules
setupModules(to, data);
if (payment > 0) {
// To avoid running into issues with EIP-170 we reuse the handlePayment function (to avoid adjusting code of that has been verified we do not adjust the method itself)
// baseGas = 0, gasPrice = 1 and gas = payment => amount = (payment + 0) * 1 = payment
handlePayment(payment, 0, 1, paymentToken, paymentReceiver);
}
emit SafeSetup(msg.sender, _owners, _threshold, to, fallbackHandler);
}
/** @notice Executes a `operation` {0: Call, 1: DelegateCall}} transaction to `to` with `value` (Native Currency)
* and pays `gasPrice` * `gasLimit` in `gasToken` token to `refundReceiver`.
* @dev The fees are always transferred, even if the user transaction fails.
* This method doesn't perform any sanity check of the transaction, such as:
* - if the contract at `to` address has code or not
* - if the `gasToken` is a contract or not
* It is the responsibility of the caller to perform such checks.
* @param to Destination address of Safe transaction.
* @param value Ether value of Safe transaction.
* @param data Data payload of Safe transaction.
* @param operation Operation type of Safe transaction.
* @param safeTxGas Gas that should be used for the Safe transaction.
* @param baseGas Gas costs that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
* @param gasPrice Gas price that should be used for the payment calculation.
* @param gasToken Token address (or 0 if ETH) that is used for the payment.
* @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
* @param signatures Signature data that should be verified.
* Can be packed ECDSA signature ({bytes32 r}{bytes32 s}{uint8 v}), contract signature (EIP-1271) or approved hash.
* @return success Boolean indicating transaction's success.
*/
function execTransaction(
address to,
uint256 value,
bytes calldata data,
Enum.Operation operation,
uint256 safeTxGas,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
address payable refundReceiver,
bytes memory signatures
) public payable virtual returns (bool success) {
bytes32 txHash;
// Use scope here to limit variable lifetime and prevent `stack too deep` errors
{
bytes memory txHashData = encodeTransactionData(
// Transaction info
to,
value,
data,
operation,
safeTxGas,
// Payment info
baseGas,
gasPrice,
gasToken,
refundReceiver,
// Signature info
nonce
);
// Increase nonce and execute transaction.
nonce++;
txHash = keccak256(txHashData);
checkSignatures(txHash, txHashData, signatures);
}
address guard = getGuard();
{
if (guard != address(0)) {
Guard(guard).checkTransaction(
// Transaction info
to,
value,
data,
operation,
safeTxGas,
// Payment info
baseGas,
gasPrice,
gasToken,
refundReceiver,
// Signature info
signatures,
msg.sender
);
}
}
// We require some gas to emit the events (at least 2500) after the execution and some to perform code until the execution (500)
// We also include the 1/64 in the check that is not send along with a call to counteract potential shortings because of EIP-150
require(gasleft() >= ((safeTxGas * 64) / 63).max(safeTxGas + 2500) + 500, "GS010");
// Use scope here to limit variable lifetime and prevent `stack too deep` errors
{
uint256 gasUsed = gasleft();
// If the gasPrice is 0 we assume that nearly all available gas can be used (it is always more than safeTxGas)
// We only substract 2500 (compared to the 3000 before) to ensure that the amount passed is still higher than safeTxGas
success = execute(to, value, data, operation, gasPrice == 0 ? (gasleft() - 2500) : safeTxGas);
gasUsed = gasUsed.sub(gasleft());
// If no safeTxGas and no gasPrice was set (e.g. both are 0), then the internal tx is required to be successful
// This makes it possible to use `estimateGas` without issues, as it searches for the minimum gas where the tx doesn't revert
require(success || safeTxGas != 0 || gasPrice != 0, "GS013");
// We transfer the calculated tx costs to the tx.origin to avoid sending it to intermediate contracts that have made calls
uint256 payment = 0;
if (gasPrice > 0) {
payment = handlePayment(gasUsed, baseGas, gasPrice, gasToken, refundReceiver);
}
if (success) emit ExecutionSuccess(txHash, payment);
else emit ExecutionFailure(txHash, payment);
}
{
if (guard != address(0)) {
Guard(guard).checkAfterExecution(txHash, success);
}
}
}
/**
* @notice Handles the payment for a Safe transaction.
* @param gasUsed Gas used by the Safe transaction.
* @param baseGas Gas costs that are independent of the transaction execution (e.g. base transaction fee, signature check, payment of the refund).
* @param gasPrice Gas price that should be used for the payment calculation.
* @param gasToken Token address (or 0 if ETH) that is used for the payment.
* @return payment The amount of payment made in the specified token.
*/
function handlePayment(
uint256 gasUsed,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
address payable refundReceiver
) private returns (uint256 payment) {
// solhint-disable-next-line avoid-tx-origin
address payable receiver = refundReceiver == address(0) ? payable(tx.origin) : refundReceiver;
if (gasToken == address(0)) {
// For ETH we will only adjust the gas price to not be higher than the actual used gas price
payment = gasUsed.add(baseGas).mul(gasPrice < tx.gasprice ? gasPrice : tx.gasprice);
require(receiver.send(payment), "GS011");
} else {
payment = gasUsed.add(baseGas).mul(gasPrice);
require(transferToken(gasToken, receiver, payment), "GS012");
}
}
/**
* @notice Checks whether the signature provided is valid for the provided data and hash. Reverts otherwise.
* @param dataHash Hash of the data (could be either a message hash or transaction hash)
* @param data That should be signed (this is passed to an external validator contract)
* @param signatures Signature data that should be verified.
* Can be packed ECDSA signature ({bytes32 r}{bytes32 s}{uint8 v}), contract signature (EIP-1271) or approved hash.
*/
function checkSignatures(bytes32 dataHash, bytes memory data, bytes memory signatures) public view {
// Load threshold to avoid multiple storage loads
uint256 _threshold = threshold;
// Check that a threshold is set
require(_threshold > 0, "GS001");
checkNSignatures(dataHash, data, signatures, _threshold);
}
/**
* @notice Checks whether the signature provided is valid for the provided data and hash. Reverts otherwise.
* @dev Since the EIP-1271 does an external call, be mindful of reentrancy attacks.
* @param dataHash Hash of the data (could be either a message hash or transaction hash)
* @param data That should be signed (this is passed to an external validator contract)
* @param signatures Signature data that should be verified.
* Can be packed ECDSA signature ({bytes32 r}{bytes32 s}{uint8 v}), contract signature (EIP-1271) or approved hash.
* @param requiredSignatures Amount of required valid signatures.
*/
function checkNSignatures(bytes32 dataHash, bytes memory data, bytes memory signatures, uint256 requiredSignatures) public view {
// Check that the provided signature data is not too short
require(signatures.length >= requiredSignatures.mul(65), "GS020");
// There cannot be an owner with address 0.
address lastOwner = address(0);
address currentOwner;
uint8 v;
bytes32 r;
bytes32 s;
uint256 i;
for (i = 0; i < requiredSignatures; i++) {
(v, r, s) = signatureSplit(signatures, i);
if (v == 0) {
require(keccak256(data) == dataHash, "GS027");
// If v is 0 then it is a contract signature
// When handling contract signatures the address of the contract is encoded into r
currentOwner = address(uint160(uint256(r)));
// Check that signature data pointer (s) is not pointing inside the static part of the signatures bytes
// This check is not completely accurate, since it is possible that more signatures than the threshold are send.
// Here we only check that the pointer is not pointing inside the part that is being processed
require(uint256(s) >= requiredSignatures.mul(65), "GS021");
// Check that signature data pointer (s) is in bounds (points to the length of data -> 32 bytes)
require(uint256(s).add(32) <= signatures.length, "GS022");
// Check if the contract signature is in bounds: start of data is s + 32 and end is start + signature length
uint256 contractSignatureLen;
// solhint-disable-next-line no-inline-assembly
assembly {
contractSignatureLen := mload(add(add(signatures, s), 0x20))
}
require(uint256(s).add(32).add(contractSignatureLen) <= signatures.length, "GS023");
// Check signature
bytes memory contractSignature;
// solhint-disable-next-line no-inline-assembly
assembly {
// The signature data for contract signatures is appended to the concatenated signatures and the offset is stored in s
contractSignature := add(add(signatures, s), 0x20)
}
require(ISignatureValidator(currentOwner).isValidSignature(data, contractSignature) == EIP1271_MAGIC_VALUE, "GS024");
} else if (v == 1) {
// If v is 1 then it is an approved hash
// When handling approved hashes the address of the approver is encoded into r
currentOwner = address(uint160(uint256(r)));
// Hashes are automatically approved by the sender of the message or when they have been pre-approved via a separate transaction
require(msg.sender == currentOwner || approvedHashes[currentOwner][dataHash] != 0, "GS025");
} else if (v > 30) {
// If v > 30 then default va (27,28) has been adjusted for eth_sign flow
// To support eth_sign and similar we adjust v and hash the messageHash with the Ethereum message prefix before applying ecrecover
currentOwner = ecrecover(keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", dataHash)), v - 4, r, s);
} else {
// Default is the ecrecover flow with the provided data hash
// Use ecrecover with the messageHash for EOA signatures
currentOwner = ecrecover(dataHash, v, r, s);
}
require(currentOwner > lastOwner && owners[currentOwner] != address(0) && currentOwner != SENTINEL_OWNERS, "GS026");
lastOwner = currentOwner;
}
}
/**
* @notice Marks hash `hashToApprove` as approved.
* @dev This can be used with a pre-approved hash transaction signature.
* IMPORTANT: The approved hash stays approved forever. There's no revocation mechanism, so it behaves similarly to ECDSA signatures
* @param hashToApprove The hash to mark as approved for signatures that are verified by this contract.
*/
function approveHash(bytes32 hashToApprove) external {
require(owners[msg.sender] != address(0), "GS030");
approvedHashes[msg.sender][hashToApprove] = 1;
emit ApproveHash(hashToApprove, msg.sender);
}
/**
* @notice Returns the ID of the chain the contract is currently deployed on.
* @return The ID of the current chain as a uint256.
*/
function getChainId() public view returns (uint256) {
uint256 id;
// solhint-disable-next-line no-inline-assembly
assembly {
id := chainid()
}
return id;
}
/**
* @dev Returns the domain separator for this contract, as defined in the EIP-712 standard.
* @return bytes32 The domain separator hash.
*/
function domainSeparator() public view returns (bytes32) {
return keccak256(abi.encode(DOMAIN_SEPARATOR_TYPEHASH, getChainId(), this));
}
/**
* @notice Returns the pre-image of the transaction hash (see getTransactionHash).
* @param to Destination address.
* @param value Ether value.
* @param data Data payload.
* @param operation Operation type.
* @param safeTxGas Gas that should be used for the safe transaction.
* @param baseGas Gas costs for that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
* @param gasPrice Maximum gas price that should be used for this transaction.
* @param gasToken Token address (or 0 if ETH) that is used for the payment.
* @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
* @param _nonce Transaction nonce.
* @return Transaction hash bytes.
*/
function encodeTransactionData(
address to,
uint256 value,
bytes calldata data,
Enum.Operation operation,
uint256 safeTxGas,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
address refundReceiver,
uint256 _nonce
) public view returns (bytes memory) {
bytes32 safeTxHash = keccak256(
abi.encode(
SAFE_TX_TYPEHASH,
to,
value,
keccak256(data),
operation,
safeTxGas,
baseGas,
gasPrice,
gasToken,
refundReceiver,
_nonce
)
);
return abi.encodePacked(bytes1(0x19), bytes1(0x01), domainSeparator(), safeTxHash);
}
/**
* @notice Returns transaction hash to be signed by owners.
* @param to Destination address.
* @param value Ether value.
* @param data Data payload.
* @param operation Operation type.
* @param safeTxGas Fas that should be used for the safe transaction.
* @param baseGas Gas costs for data used to trigger the safe transaction.
* @param gasPrice Maximum gas price that should be used for this transaction.
* @param gasToken Token address (or 0 if ETH) that is used for the payment.
* @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
* @param _nonce Transaction nonce.
* @return Transaction hash.
*/
function getTransactionHash(
address to,
uint256 value,
bytes calldata data,
Enum.Operation operation,
uint256 safeTxGas,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
address refundReceiver,
uint256 _nonce
) public view returns (bytes32) {
return keccak256(encodeTransactionData(to, value, data, operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, _nonce));
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./Safe.sol";
/**
* @title SafeL2 - An implementation of the Safe contract that emits additional events on transaction executions.
* @notice For a more complete description of the Safe contract, please refer to the main Safe contract `Safe.sol`.
* @author Stefan George - @Georgi87
* @author Richard Meissner - @rmeissner
*/
contract SafeL2 is Safe {
event SafeMultiSigTransaction(
address to,
uint256 value,
bytes data,
Enum.Operation operation,
uint256 safeTxGas,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
address payable refundReceiver,
bytes signatures,
// We combine nonce, sender and threshold into one to avoid stack too deep
// Dev note: additionalInfo should not contain `bytes`, as this complicates decoding
bytes additionalInfo
);
event SafeModuleTransaction(address module, address to, uint256 value, bytes data, Enum.Operation operation);
// @inheritdoc Safe
function execTransaction(
address to,
uint256 value,
bytes calldata data,
Enum.Operation operation,
uint256 safeTxGas,
uint256 baseGas,
uint256 gasPrice,
address gasToken,
address payable refundReceiver,
bytes memory signatures
) public payable override returns (bool) {
bytes memory additionalInfo;
{
additionalInfo = abi.encode(nonce, msg.sender, threshold);
}
emit SafeMultiSigTransaction(
to,
value,
data,
operation,
safeTxGas,
baseGas,
gasPrice,
gasToken,
refundReceiver,
signatures,
additionalInfo
);
return super.execTransaction(to, value, data, operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, signatures);
}
// @inheritdoc Safe
function execTransactionFromModule(
address to,
uint256 value,
bytes memory data,
Enum.Operation operation
) public override returns (bool success) {
emit SafeModuleTransaction(msg.sender, to, value, data, operation);
success = super.execTransactionFromModule(to, value, data, operation);
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
pragma abicoder v2;
import "../../libraries/SafeStorage.sol";
struct UserOperation {
address sender;
uint256 nonce;
bytes initCode;
bytes callData;
uint256 callGasLimit;
uint256 verificationGasLimit;
uint256 preVerificationGas;
uint256 maxFeePerGas;
uint256 maxPriorityFeePerGas;
bytes paymasterAndData;
bytes signature;
}
interface ISafe {
function execTransactionFromModule(address to, uint256 value, bytes memory data, uint8 operation) external returns (bool success);
}
/// @dev A Dummy 4337 Module/Handler for testing purposes
/// ⚠️ ⚠️ ⚠️ DO NOT USE IN PRODUCTION ⚠️ ⚠️ ⚠️
/// The module does not perform ANY validation, it just executes validateUserOp and execTransaction
/// to perform the opcode level compliance by the bundler.
contract Test4337ModuleAndHandler is SafeStorage {
address public immutable myAddress;
address public immutable entryPoint;
address internal constant SENTINEL_MODULES = address(0x1);
constructor(address entryPointAddress) {
entryPoint = entryPointAddress;
myAddress = address(this);
}
function validateUserOp(UserOperation calldata userOp, bytes32, uint256 missingAccountFunds) external returns (uint256 validationData) {
address payable safeAddress = payable(userOp.sender);
ISafe senderSafe = ISafe(safeAddress);
if (missingAccountFunds != 0) {
senderSafe.execTransactionFromModule(entryPoint, missingAccountFunds, "", 0);
}
return 0;
}
function execTransaction(address to, uint256 value, bytes calldata data) external payable {
address payable safeAddress = payable(msg.sender);
ISafe safe = ISafe(safeAddress);
require(safe.execTransactionFromModule(to, value, data, 0), "tx failed");
}
function enableMyself() public {
require(myAddress != address(this), "You need to DELEGATECALL, sir");
// Module cannot be added twice.
require(modules[myAddress] == address(0), "GS102");
modules[myAddress] = modules[SENTINEL_MODULES];
modules[SENTINEL_MODULES] = myAddress;
}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../interfaces/ERC1155TokenReceiver.sol";
import "../external/SafeMath.sol";
/**
* @title ERC1155Token - A test ERC1155 token contract
*/
contract ERC1155Token {
using SafeMath for uint256;
// Mapping from token ID to owner balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Get the specified address' balance for token with specified ID.
* @param owner The address of the token holder
* @param id ID of the token
* @return The owner's balance of the token type requested
*/
function balanceOf(address owner, uint256 id) public view returns (uint256) {
require(owner != address(0), "ERC1155: balance query for the zero address");
return _balances[id][owner];
}
/**
* @notice Transfers `value` amount of an `id` from the `from` address to the `to` address specified.
* Caller must be approved to manage the tokens being transferred out of the `from` account.
* If `to` is a smart contract, will call `onERC1155Received` on `to` and act appropriately.
* @param from Source address
* @param to Target address
* @param id ID of the token type
* @param value Transfer amount
* @param data Data forwarded to `onERC1155Received` if `to` is a contract receiver
*/
function safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes calldata data) external {
require(to != address(0), "ERC1155: target address must be non-zero");
require(
from == msg.sender || _operatorApprovals[from][msg.sender] == true,
"ERC1155: need operator approval for 3rd party transfers."
);
_balances[id][from] = _balances[id][from] - value;
_balances[id][to] = value + _balances[id][to];
_doSafeTransferAcceptanceCheck(msg.sender, from, to, id, value, data);
}
/**
* @dev Test function to mint an amount of a token with the given ID
* @param to The address that will own the minted token
* @param id ID of the token to be minted
* @param value Amount of the token to be minted
* @param data Data forwarded to `onERC1155Received` if `to` is a contract receiver
*/
function mint(address to, uint256 id, uint256 value, bytes calldata data) external {
require(to != address(0), "ERC1155: mint to the zero address");
_balances[id][to] = value + _balances[id][to];
_doSafeTransferAcceptanceCheck(msg.sender, address(0), to, id, value, data);
}
/**
* @notice Returns true if `account` is a contract.
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param account The address being queried
* @return True if `account` is a contract
*/
function isContract(address account) internal view returns (bool) {
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Internal function to invoke `onERC1155Received` on a target address
* The call is not executed if the target address is not a contract
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param to The address which will now own the token
* @param id The id of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
*/
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 value,
bytes memory data
) internal {
if (isContract(to)) {
require(
ERC1155TokenReceiver(to).onERC1155Received(operator, from, id, value, data) ==
ERC1155TokenReceiver(to).onERC1155Received.selector,
"ERC1155: got unknown value from onERC1155Received"
);
}
}
}